23. Rigging Equipment And General Deck Items

The IMPA 230630 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x9" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw configuration. It has a working load limit of 2,200 lbs. and is intended for use with 3/4" diameter cable, rope, or chain. This...

The 'IMPA 230629 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x6" JAW-JAW' is a turnbuckle that is used to adjust or tension ropes, cables, or other lines. It is made of galvanized steel for durability and has a 3/4 inch diameter with 6 inch jaws. This...

This is a galvanized steel turnbuckle. It is 5/8" in diameter and 12" long. It has a jaw-jaw configuration, which is intended for use with cables, ropes, or wires. It is rated for a working load limit of 1,120 lbs.

This turnbuckle is made of galvanized steel and is 9 inches long. It has 5/8 inch diameter jaws at each end. The turnbuckle is intended for use in tensioning and is rated for a working load limit of 1,180 pounds.

The IMPA 230625 TURNBUCKLE (SPEC.FF-T-791B) GALV. 5/8"x6" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is designed for use with 5/8" diameter cable, has a maximum working load of 4,540 lbs., and a breaking load of 45,400 lbs...

The IMPA 230624 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1/2"x12" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is 1/2" in diameter and 12" long. It is used to attach and tension wire rope, cable, or other similar materials.

This turnbuckle is made of galvanized steel and is 1/2" x 9". It is a jaw-jaw turnbuckle, meaning that it has hooks on both ends. It is used to tighten or loosen ropes, cables, or chains.

The IMPA 230622 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1/2"x6" JAW-JAW is a galvanized, jaw-to-jaw turnbuckle that is 1/2" x 6". It is intended for use in rigging and lifting applications. It features a safety factor of 4:1 and is made of cast steel for...

The IMPA 230621 TURNBUCKLE is a galvanized steel turnbuckle with a jaw-jaw connection. It is designed for use with 3/8" diameter cable, has a 6" take-up, and has a working load limit of 400 lbs.

The IMPA 230583 TURNBUCKLE STEEL GALVANISED OPEN TYPE M24x350 HOOK-HOOK is a steel turnbuckle with galvanized finish. It is open type with M24x350 mm dimensions. The turnbuckle has hooks at both ends. It is used to tension or relax wires, ropes, or...

IMPA 230582 TURNBUCKLE STEEL GALVANISED OPEN TYPE M22x330 HOOK-HOOK is a steel turnbuckle with galvanized finish. It is open type with M22x330 hooks on both ends. This product is intended for use as a rigging or mooring component. It is made of durable...

The IMPA 230581 TURNBUCKLE STEEL GALVANISED OPEN TYPE M20x300 HOOK-HOOK is a steel turnbuckle that is galvanized for corrosion resistance. It is open type with hooks on both ends and is 300 mm in length. It is designed for use with 20 mm diameter rods or...