Turnbuckles Jaw and Jaw

This is a 1 1/2"x24" galvanized steel turnbuckle with jaw-jaw ends. It is rated for use with up to 5/8" diameter cable and has a working load limit of 1240 pounds. This turnbuckle is intended for use in applications where corrosion resistance is...

IMPA 230683 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1 1/2"x18" JAW-JAW is a turnbuckle that is galvanized and 1 1/2 inches by 18 inches. It is a jaw-jaw turnbuckle.

This is a IMPA turnbuckle that is galvanized and 1 1/4 inches by 24 inches. It is for use with jaw-jaw rigging.

The IMPA 230680 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1 1/4"x18" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is 1 1/4 inches in diameter and 18 inches long. This turnbuckle is for use with marine rigging and is made to...

This is a turnbuckle that is galvanized and 1"x18". It is a jaw-jaw turnbuckle.

This turnbuckle is made of galvanized steel and is 1"x12". It is a jaw-jaw type turnbuckle. Its intended use is for rigging and lifting. It has a working load limit of 1,120 lbs.

The IMPA 230635 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1"x6" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is 1" in diameter and 6" long, and has a working load limit of 2,400 lbs. This turnbuckle is designed for use in marine...

The IMPA 230634 TURNBUCKLE (SPEC.FF-T-791B) GALV. 7/8"x18" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is designed for use with 7/8" diameter cable or rigging and has a maximum working load of 2,268 lbs. This turnbuckle is...

This turnbuckle is made of galvanized steel and is 12" long. It has a 7/8" diameter and is Jaw-Jaw type. This turnbuckle is for use with rigging and is used to adjust tension in lines. It is also used to take up slack, connect, or disconnect two ropes or...

This is a IMPA 230632 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x18" JAW-JAW. It is made of galvanized steel and is 3/4"x18". It is used to adjust the tension in ropes, cables, or other tensioning systems.

The IMPA 230631 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x12" JAW-JAW is a galvanized steel turnbuckle with a 3/4" diameter and 12" length. It has a jaw-jaw configuration, meaning that the load is attached to the body of the turnbuckle at each end. This...

The IMPA 230630 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x9" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw configuration. It has a working load limit of 2,200 lbs. and is intended for use with 3/4" diameter cable, rope, or chain. This...