Turnbuckles Jaw and Eye

This is a galvanized steel turnbuckle with 1 1/2" x 18" eyes on each end. It has a working load limit of 2,310 lbs. and is designed for use with wire rope and cables.

The IMPA 230685 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1 1/4"x18" EYE-JAW is a galvanized steel turnbuckle with a 1 1/4" diameter and 18" length. It has an eye-jaw end fitting and is rated for use with up to 7,000 pounds. This turnbuckle is used to adjust...

This turnbuckle is made of galvanized steel and is 1"x18" in size. It has an eye on one end and a jaw on the other, and is used to tension and secure rigging. It is rated for use with 1/4" diameter cable.

The IMPA 230676 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1"x12" EYE-JAW is a galvanized steel turnbuckle with a 1" threaded shank and a 12" overall length. It has an eye at one end and a jaw at the other, both of which are designed for use with wire rope or...

This turnbuckle is made of galvanized steel and is 1" x 6". It has an eye-jaw end and is used to adjust tension in guy wires, cables, and ropes.

This turnbuckle is made of galvanized steel and is 7/8"x18". It is intended for use with eye and jaw fittings. It is UL Listed and CSA Certified.

This is a galvanized steel turnbuckle with a 7/8" diameter and 12" length. It is designed for use with wire rope and has an eye-jaw end fitting. It is rated for use up to 3,000 pounds.

This is a galvanized steel turnbuckle with a 3/4" body and 18" take-up. It has eye and jaw end fittings. It is used to tension or take up slack in wire rope or other tensioning applications.

The IMPA 230671 TURNBUCKLE is a galvanized steel turnbuckle with a 3/4" diameter and 12" length. It has an eye-jaw end type and is rated for use with up to 2000 lb. loads. This turnbuckle is ideal for use in a variety of applications, including rigging,...

This IMPA 230670 TURNBUCKLE is a specially designed fastener used to secure and adjust the tension of ropes, cables, or other lines. It is constructed of durable galvanized steel and features a 3/4" diameter x 9" length body with eyebolt and jaw-type end...

The IMPA 230669 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x6" EYE-JAW is a corrosion-resistant galvanized steel turnbuckle with a working load limit of 2300 lbs. It has a jaw-and-eye end configuration and is suitable for use in marine and other demanding...

The IMPA 230667 TURNBUCKLE (SPEC.FF-T-791B) GALV. 5/8"x12" EYE-JAW is a galvanized steel turnbuckle with 5/8" diameter and 12" length. It is designed for use in marine applications and has an eye-jaw end configuration. This turnbuckle has a working...