IMPA 230633 TURNBUCKLE (SPEC.FF-T-791B) GALV. 7/8"x12" JAW-JAW
(No reviews yet)
Write a Review
Images are for illustrative purposes only.
The actual product may differ from the picture shown.
- Weight:
- 3.52 KGS
- Shipping:
- Calculated at Checkout
Description
This turnbuckle is made of galvanized steel and is 12" long. It has a 7/8" diameter and is Jaw-Jaw type. This turnbuckle is for use with rigging and is used to adjust tension in lines. It is also used to take up slack, connect, or disconnect two ropes or cables.
View AllClose
Related Products
Related Products
IMPA 230636 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1"x12" JAW-JAW
£76.57
This turnbuckle is made of galvanized steel and is 1"x12". It is a jaw-jaw type turnbuckle. Its intended use is for rigging and lifting. It has a working load limit of 1,120 lbs.
IMPA 230627 TURNBUCKLE (SPEC.FF-T-791B) GALV. 5/8"x12" JAW-JAW
£34.03
This is a galvanized steel turnbuckle. It is 5/8" in diameter and 12" long. It has a jaw-jaw configuration, which is intended for use with cables, ropes, or wires. It is rated for a working load...
IMPA 230673 TURNBUCKLE (SPEC.FF-T-791B) GALV. 7/8"x12" EYE-JAW
£56.72
This is a galvanized steel turnbuckle with a 7/8" diameter and 12" length. It is designed for use with wire rope and has an eye-jaw end fitting. It is rated for use up to 3,000 pounds.
IMPA 230631 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x12" JAW-JAW
£45.37
The IMPA 230631 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x12" JAW-JAW is a galvanized steel turnbuckle with a 3/4" diameter and 12" length. It has a jaw-jaw configuration, meaning that the load is...
IMPA 230634 TURNBUCKLE (SPEC.FF-T-791B) GALV. 7/8"x18" JAW-JAW
£65.22
The IMPA 230634 TURNBUCKLE (SPEC.FF-T-791B) GALV. 7/8"x18" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is designed for use with 7/8" diameter cable or rigging and has...