Turnbuckles Jaw and Jaw

The 'IMPA 230629 TURNBUCKLE (SPEC.FF-T-791B) GALV. 3/4"x6" JAW-JAW' is a turnbuckle that is used to adjust or tension ropes, cables, or other lines. It is made of galvanized steel for durability and has a 3/4 inch diameter with 6 inch jaws. This...

This is a galvanized steel turnbuckle. It is 5/8" in diameter and 12" long. It has a jaw-jaw configuration, which is intended for use with cables, ropes, or wires. It is rated for a working load limit of 1,120 lbs.

This turnbuckle is made of galvanized steel and is 9 inches long. It has 5/8 inch diameter jaws at each end. The turnbuckle is intended for use in tensioning and is rated for a working load limit of 1,180 pounds.

The IMPA 230625 TURNBUCKLE (SPEC.FF-T-791B) GALV. 5/8"x6" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is designed for use with 5/8" diameter cable, has a maximum working load of 4,540 lbs., and a breaking load of 45,400 lbs...

The IMPA 230624 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1/2"x12" JAW-JAW is a galvanized steel turnbuckle with a jaw-to-jaw connection. It is 1/2" in diameter and 12" long. It is used to attach and tension wire rope, cable, or other similar materials.

This turnbuckle is made of galvanized steel and is 1/2" x 9". It is a jaw-jaw turnbuckle, meaning that it has hooks on both ends. It is used to tighten or loosen ropes, cables, or chains.

The IMPA 230622 TURNBUCKLE (SPEC.FF-T-791B) GALV. 1/2"x6" JAW-JAW is a galvanized, jaw-to-jaw turnbuckle that is 1/2" x 6". It is intended for use in rigging and lifting applications. It features a safety factor of 4:1 and is made of cast steel for...

The IMPA 230621 TURNBUCKLE is a galvanized steel turnbuckle with a jaw-jaw connection. It is designed for use with 3/8" diameter cable, has a 6" take-up, and has a working load limit of 400 lbs.